Renovate your bathroom with the right waterproofing and decor tips

This guide provides essential insights into bathroom waterproofing, from protecting floors to walls, along with expert advice on selecting materials and planning the layout. Plus, it includes practical tips for long-term maintenance to keep your bathroom in great condition.

Share On:

Renovating your bathroom can be an exciting yet overwhelming project, especially if you're not well-versed in the technical aspects. Whether you're looking to update a small bathroom or refurbish a large one, understanding important factors like bathroom waterproofing is crucial to ensure durability and prevent costly repairs down the road. 

This comprehensive guide will walk you through all the essential considerations of a bathroom renovation, from waterproofing and material selection to layout optimisation and decor tips. 

Why is waterproofing non-negotiable?
 

Waterproofing is arguably the most critical step in any bathroom renovation. In Indian homes, common issues such as seepage, mould, and water damage often stem from inadequate waterproofing. Without proper protection, water can seep into walls and floors, leading to structural damage, increased maintenance costs, and decreased longevity of your renovation. 

Advanced waterproofing solutions like those offered by Dr. Fixit protect your bathroom against these issues. Whether you’re tackling floors, walls, or joints, these areas need special attention to prevent moisture buildup. Investing in quality waterproofing materials will keep your renovation in check for years. 

Dr. Fixit - Acetech - Bathseal 

Common waterproofing issues in Indian bathrooms 
 

Some of the common problems that occur in homes that lack bathroom waterproofing are – 

1. Problem – Older buildings are more prone to moisture infiltration, leading to water seeping and dampness through walls and ceilings. 
   
   Solution – Ensure thorough waterproofing of both internal and external walls, especially in areas prone to water exposure. Use high-quality sealants and waterproof coatings, such as those offered by Dr. Fixit. 
    
2. Problem – The humid climate encourages mould and mildew to flourish, leading to unsightly stains and potential health risks. 
   
   Solution – Regular cleaning with anti-fungal solutions and proper ventilation (through exhaust fans or open windows) can help prevent mould. Waterproof coatings can also act as a barrier. 
    
3. Problem – Leaky plumbing is a common problem that leads to water pooling around pipes, causing damage to flooring and walls. 
   
   Solution – Proper installation of pipes with tight seals is essential. Regular inspection and maintenance of plumbing systems can also prevent leaks from becoming bigger. 
    
4. Problem – The junctions between walls, floors, and ceilings are often vulnerable to water infiltration. 
   
   Solution – Pay close attention to waterproofing at the joints, using high-quality sealants. Also, waterproofing membranes should be applied to these critical areas during renovation. 
    
5. Problem – Bathroom tiles may crack over time due to water pressure, poor-quality materials, or improper installation, leading to leaks. 
   
   Solution - Use high-quality tiles that are resistant to water damage. Ensure they are installed with the right adhesive and grout. Seal the grout lines to prevent moisture penetration. 
    
6. Problem – Poorly designed or clogged drains can cause water to stagnate, causing water damage and mould and mildew buildup. 
   
   Solution - Ensure the bathroom has adequate drainage, with sloped floors directing water toward the drains. Clean the drains regularly to avoid blockages. 
    
7. Problem – Lack of or poor-quality waterproofing membranes beneath tiles can cause moisture to seep into the floor and walls. 
   
   Solution – Apply a reliable waterproof membrane before tiling. This extra layer will prevent water from getting trapped underneath the surface. 

Planning your bathroom renovation 
 

A successful bathroom renovation begins with a clear plan balancing aesthetics and functionality. Here are some critical points to consider – 

1. Space optimisation –
   
   Whether you have a compact or spacious bathroom, the layout should optimise space to enhance practicality. Consider corner sinks, floating vanities, and wall-mounted storage for smaller bathrooms to free up floor space. In larger bathrooms, you can experiment with expansive features like freestanding tubs and rain showers. 
    
2. Budget considerations –
   
   Renovating a bathroom can be costly, so it’s important to balance quality with affordability. While cutting costs on materials is tempting, opting for cheaper, low-quality options may eventually lead to more expenses. Always prioritise waterproof bathroom flooring and other structural elements over aesthetics, as they form the foundation of a long-lasting bathroom. 
    
3. Consulting professionals –
   
   Working with experienced contractors, architects, or interior designers is essential for plumbing, waterproofing, and layout planning tasks. They can guide you on technical aspects and ensure your bathroom renovation meets all the safety and quality standards. 

Material selection and installation 

Choosing the right materials for your bathroom is one of the primary ways of creating a durable and waterproof space. Below are a few things that you need to keep in check – 

1. Selecting the right tiles 
   
   Not all tiles are equally resistant to water. When choosing tiles, look for those with a porcelain or ceramic base, as they have low water absorption rates. The Water Absorption Rate (listed in the specifications) should be less than 0.5% for high water resistance. Tiles with a glazed finish are especially effective at repelling moisture. 
   
   ​How to check? 
   
   Use a simple water test by placing a drop of water on the surface of the tile. The tile has good water resistance if the water beads up and doesn't penetrate the surface within a few minutes. You can also check for the Porcelain Enamel Institute (PEI) rating to determine its durability against wear and tear. 
    
2. Grout and sealants 
   
   Epoxy grout is far superior to traditional cement-based grout when it comes to water resistance. It forms a dense, non-porous layer that resists water infiltration and prevents stains. 
   
   How to check? 
   
   Ensure that the grout is thoroughly sealed after installation. Over time, grout can become porous and allow water to seep through. A quick check is to apply a small amount of water to the grout lines. If the grout darkens, it's absorbing moisture, indicating it's time to reseal or switch to a more water-resistant option like epoxy grout. 
    
3. Waterproof bathroom ceiling panels 
   
   Waterproof bathroom ceiling panels are a smart addition that prevents moisture buildup in humid environments. Many ceiling panels available today are designed to withstand constant exposure to moisture, keeping your bathroom dry and visually appealing. Look for panels that are UV resistant and can withstand moisture and temperature fluctuations that are common in bathrooms. 
   
   ​How to check? 
   
   Examine the panel's composition. PVC panels have a smooth surface that prevents water absorption, whereas older materials like gypsum or wood may allow moisture to penetrate. If you’re considering waterproof bathroom ceiling panels, check for a CE marking or ISO certification, which ensures the product meets international water-resistance standards. 
    
4. Plumbing system installation 
   
   Plumbing issues are one of the leading causes of water damage. Use PPR (polypropylene random copolymer) pipes or CPVC (chlorinated polyvinyl chloride) pipes, which are known for their resistance to high temperatures and water corrosion. Always use high-quality waterproof sealing tape at all joints to prevent leaks. Leaky pipes can undo all your bathroom waterproofing efforts, so hiring a professional plumber to inspect and install reliable systems is beneficial to avoid future issues. 
   
   How to check? 
   
   After installation, run a water test to check for leaks. Turn on all water fixtures, then check each joint and connection for signs of leakage. Before finishing the installation, a professional plumber should use a pressure testing kit to ensure the integrity of the plumbing system. 

Decor and aesthetic enhancements 
 

Your bathroom decor is essential in turning it into a functional yet visually attractive space. Consider the following aesthetic enhancements – 

1. Lighting –
   
   Install bright lighting around the mirror for daily grooming while incorporating softer lighting for a relaxing atmosphere during baths or showers. For a luxurious touch, consider recessed lighting or wall sconces, which can create an inviting, spa-like feel. 
    
2. Trending bathroom decor styles –
   
   Sleek lines and neutral tones are popular for those seeking a clean and minimal aesthetic. You can use natural stone finishes, textured tiles, and wood accents for a more luxurious design.  
    
3. Storage solutions –
   
   Efficient storage is vital, especially for compact bathrooms. Floating shelves, built-in cabinets, or vertical storage units can keep your bathroom organised and clutter-free while providing easy access to essentials. 

Long-term maintenance tips
 

Once your renovation is complete, maintaining it properly ensures its longevity. Regularly inspect the bathroom waterproofing’s effectiveness to ensure there’s no damage. This is especially important in high-moisture areas like showers and around plumbing fixtures. 

Cleaning your bathroom regularly is equally important to maintain its aesthetic appeal and hygiene. Use non-abrasive cleaners and avoid harsh chemicals that could damage your tiles or fittings. 

Conclusion 
 

Waterproofing ensures your bathroom remains dry and free of water-related issues for years. By selecting the right materials, working with professionals, and considering both aesthetic and functional elements, you can create a stylish and practical space. 

Investing in trusted waterproofing solutions like Dr. Fixit will prevent costly repairs and upkeep, allowing you to enjoy a bathroom built to last. Don’t wait for water damage to ruin your bathroom. Fill out the form below to contact the experts at Dr. Fixit today.