Below Ground Waterproofing FAQs

Integral Waterproofing are the compounds to be used with cement while making the new structure. It makes the plaster and concrete dense. So voids don’t form and capillaries carrying water are broken. This serves as an essential structure waterproofing solution for new home owners.

We advise using Dr. Fixit Pidiproof LW+ as an integral waterproofing compound along with the usage of Dr. Fixit Bitufix. This approach gives optimum waterproofing to plaster & concrete, resists corrosion in steel bars. It also helps increase the workability of mortar which reduces the rebounds loss. Thus, it helps save time & money

Yes, if coated on the plinth beam of the foundation this compound creates a barrier, for the movement of water. Thus preventing any efflorescence from coming on the walls.

Dr. Fixit's basement waterproofing solutions are designed to withstand continuous groundwater pressure and soil moisture, applied to walls and floors either from the inside as a retrofit or, preferably, from the outside during construction for more effective protection. Integral waterproofing compounds mixed into the concrete add an additional layer of resistance from within the structure. Because basement leaks are harder to diagnose and repair once the building is complete, Dr. Fixit recommends addressing waterproofing at the construction stage wherever possible rather than after occupation.

Dr. Fixit waterproofs lift pits and similar underground structures using systems designed to resist constant groundwater pressure, since these areas sit below the water table in many sites and face continuous moisture exposure from all sides. Integral waterproofing compounds mixed into the concrete during construction, combined with surface coatings on internal walls and floors, provide layered protection against water ingress. Because a lift pit is difficult to access for repairs once equipment is installed, getting the waterproofing right during construction is especially important.

Dr. Fixit waterproofs retaining walls by treating the soil-facing side of the wall before backfilling, since this surface will be in constant contact with damp earth and, in some cases, groundwater pressure after construction. A waterproofing coating or membrane system is applied to the cleaned concrete, with special attention to any construction joints where sections of the wall meet. Since retaining walls become inaccessible once backfilled, Dr. Fixit recommends treating and inspecting the waterproofing thoroughly before the excavation is closed up.

Dr. Fixit's basement waterproofing methods account for the variable soil and groundwater conditions found across India, from high water-table coastal areas to drier inland regions with expansive clay soils, both of which put different kinds of pressure on basement walls. Applying waterproofing from the outer face of the wall during construction generally offers stronger protection against groundwater than treating it from inside afterward. Integral waterproofing compounds added to the concrete mix provide an additional layer of resistance suited to challenging soil conditions.

Dr. Fixit waterproofs septic tanks by treating the internal walls and floor with a cementitious or coating-based waterproofing system designed to resist both water pressure and the chemical exposure from wastewater, which is more aggressive than conditions in a typical water storage tank. Cracks and joints, including the connection points for inlet and outlet pipes, need particular attention since they are common sources of leakage. Because septic tanks are underground and difficult to access after backfilling, getting the waterproofing right before burial is important to avoid costly excavation later.

Dr. Fixit treats basement leakage with waterproofing systems designed to withstand constant contact with groundwater and soil moisture, applied to the basement walls and floor from the inside or, ideally, from the outside during construction. Since basements sit below ground level and face continuous hydrostatic pressure, the waterproofing needs to be more robust than for above-ground walls, and any cracks or construction joints require particular attention as common leak points. Dr. Fixit recommends professional assessment for basement leakage, since fixing it properly often involves understanding the surrounding soil and water table conditions.