What to expect from Dr. Fixit? Waterproofing solutions, price, and more

Dr. Fixit covers waterproofing across seven key areas of your home, from rooftops to below-ground structures, with targeted solutions for each. The right waterproofing system depends on where you need protection, and getting it wrong can cost significantly more to fix later. Waterproofing cost per square feet varies based on the area, method, and product, but knowing the key variables helps you budget realistically.

Share On:

When safeguarding your home from water damage, choosing the right waterproofing solutions is paramount. Dr. Fixit, a renowned name in the industry, has been at the forefront of providing comprehensive waterproofing products and services. Whether you're dealing with leaky roofs, damp walls, or moisture-laden basements, Dr. Fixit offers a range of solutions designed to address various water-related issues effectively.

This article will delve into what you can expect from Dr. Fixit, covering the spectrum of their waterproofing solutions, pricing, and more.
 

Areas covered, common issues in them, and their solutions
 

Dr. Fixit's waterproofing products can take care of the following problems and areas for you:

• Roof
  
  Common issues: Water seepage and leakage due to constant exposure to rain and UV rays.
  
  Solution: Dr. Fixit offers roof waterproof protective coatings that create a seamless, flexible, waterproof layer resisting water and UV damage.
   
• Ceiling
  
  Common issues: Water stains and mould growth caused by leaks on the roof or upper floors.
  
  Solution: Cementitious coatings seal and protect the ceiling from moisture penetration.
   
• Bathroom/kitchen and other wet areas
  
  Common issues: Persistent dampness and mould due to high humidity and water splashes.
  
  Solution: A few products offer coatings that are perfect for this purpose as they create a waterproof wall barrier and prevent moisture ingress.
   
• External walls
  
  Common issues: Water infiltration and paint peeling due to rain and moisture exposure.
  
  Solution: Dr. Fixit has some high-quality waterproofing plasters and primers that provide a water-resistant and breathable protective layer.
   
• Internal walls
  
  Common issues: Damp patches and mould caused by moisture seepage from adjacent areas.
  
  Solution: Using shrink-free acrylic cementitious compounds for your interior walls is advisable. With Dr. Fixit, waterproofing prices for your walls can be several times lower when done during construction.
   
• Below ground
  
  Common issues: Flooding and dampness in the foundation due to groundwater pressure and infiltration.
  
  Solution: Products like bituminous protective coatings and integral waterproofing compounds can help create an impermeable barrier that blocks water from entering below-ground structures.
   
• Concrete water tanks
  
  Common issues: Water leakage and damage through cracks and porous concrete. 
  
  Solution: Dr. Fixit provides anti-microbial and anti-fungal waterproofing compounds that are highly resistant to water. They penetrate and seal the concrete, ensuring a water-tight and durable concrete tank.

Types of Dr. Fixit waterproofing solutions

Dr. Fixit's product range spans several waterproofing systems, each suited to different surfaces, exposure levels, and budgets. Here's a broad overview:

• Cementitious waterproofing 
  
  A waterproofing cement-based solution ideal for internal wet areas and water tanks. It's easy to apply and bonds well with concrete and masonry surfaces.
   
• Liquid-applied membrane systems
  
  Flexible coatings applied in liquid form that cure into a seamless, elastic membrane. Best suited for roofs and external surfaces exposed to weathering.
   
• Bituminous coatings
  
  Thick, adhesive compounds used primarily for below-ground waterproofing and foundation protection.
   
• Pressure injection sealants
  
  Works by penetrating concrete cracks, voids, and joints by injecting polyurethane or epoxy to seal them, blocking water ingress at a structural level. Often used for basements and water-retaining structures.

The right waterproofing system for your home depends on the area you're treating, the severity of moisture exposure, and whether the application is during construction or renovation.
 

Dr. Fixit waterproofing price: How to determine project cost

The Dr. Fixit price list and range of products are curated to provide innovative waterproofing solutions within your budget.

However, a few variables determine the final cost of any project. Here are some of them you should consider:

1. The type of solution required
2. The type of waterproofing method
3. The size of the area that needs to be treated
4. Labour costs
5. Location
6. Additional services (if needed)

As a general benchmark, waterproofing cost per square feet in India typically ranges from ₹15 to ₹80+, depending on the product category and surface type. Roof waterproofing using liquid membranes tends to sit at the higher end, while waterproofing cement-based treatments for internal walls are more budget-friendly. Getting a site assessment from a Dr. Fixit expert is the most reliable way to get an accurate project estimate.
 

DIY vs professional waterproofing

When it comes to waterproofing, many people assume that they can take care of small fixes at home. But this causes homeowners to make rookie mistakes and incur repetitive costs. For instance, a damp patch on your wall may get covered up by a fresh coat of paint, but it does not resolve the leakage behind it.

This is why, whether you are addressing smaller leaks or structural areas, like roofs, foundations, water tanks, and external walls, the full waterproofing process should be handled by a trained professional. Improper application can leave gaps in coverage, void product warranties, and result in failure within months.

The cost of redoing a botched waterproofing job almost always exceeds what a professional would have charged upfront.
 

Common mistakes to avoid

Even good products fail when the application goes wrong. Here's what to watch out for:

• Waiting for visible damage: By the time you see a stain or crack, water has usually been seeping in for a while. Don't wait for damage to be obvious before acting.
   
• Choosing on price alone: The cheapest quote isn't always the best value. Cutting corners on materials or labour almost always leads to repeat treatment costs.
   
• Skipping professional assessment: Different surfaces need different waterproofing systems. Guessing the solution without an expert look often means treating the symptom, not the source.
   
• Neglecting maintenance: Waterproofing isn't a one-and-done fix. Skipping annual checks, especially around monsoon season, shortens the lifespan of even the best treatment.
   

Lifespan and maintenance
 

A properly executed waterproofing treatment can last anywhere from 5 to 15 years, depending on the product used, the area treated, and the level of ongoing maintenance. Waterproofing cement-based treatments in tanks and internal walls tend to last longer with minimal intervention, while liquid membrane coatings might need freshening up after many years.

Annual checks, particularly before and after monsoon, are a good habit. Look for hairline cracks, bubbling paint, or damp patches. Catching issues early keeps the waterproofing cost per square feet low since you repair problem areas quickly.
 

From protection to perfection with Dr. Fixit

Homeowners can expect nothing less than reliable and effective waterproofing solutions from Dr. Fixit.

To discuss your waterproofing needs and determine the price of Dr. Fixit's waterproofing products, fill out the form below and connect with our experts.
 

Frequently asked questions (FAQs)

Is Dr. Fixit waterproofing permanent?

No waterproofing is truly permanent, but Dr. Fixit solutions typically last several years depending on the product, surface, and upkeep.

Which Dr. Fixit product is the best for roofs?

Dr. Fixit Roofseal works well for most roofs, though your contractor may recommend our other products depending on your home’s requirements. A site assessment will confirm the right fit.

How much does waterproofing cost per square feet?

Waterproofing cost per square feet in India ranges from ₹15 to ₹80+, depending on the surface, product type, and labour involved.

Can waterproofing be done during monsoon?

Most products need a dry surface to cure. Some waterproofing cement-based compounds can work on damp surfaces. Check with a Dr. Fixit expert first.