Dr. Fixit does not offer any gifts/vouchers/discount coupons etc. in exchange of personal details or particulars. Please note that we have/will not authorise(d) any communication in this regard and any such information should be disregarded. Any communication of this nature is not endorsed by Dr. Fixit or Pidilite Industries.
Dr. Fixit does not offer any gifts/vouchers/discount coupons etc. in exchange of personal details or particulars. Please note that we have/will not authorise(d) any communication in this regard and any such information should be disregarded. Any communication of this nature is not endorsed by Dr. Fixit or Pidilite Industries.
Home > Professional New > WATERPROOFING OF EFFLUENT TREATMENT PLANT

WATERPROOFING OF EFFLUENT TREATMENT PLANT

DR. FIXIT COAL TAR EPOXY

DR. FIXIT POLYPLUS CP ADMIX

 

Excellent waterproofing for effluent treatment plant.

  • HIGH WATER IMPERMEABILITY
  • INTEGRAL WATERPROOFING
  • EXCELLENT ADHESION TO CONCRETE SURFACE
  • EXCELLENT CHEMICAL RESISTANCE

Method Statement

SURFACE PREPARATION

1. Clean the surface thoroughly to get rid of all contaminants.

2. Remove all surface imperfections and repair with a polymer modified mortar using Dr. Fixit Pidicrete URP.

APPLICATION

1. Add the prescribed quantity of Dr. Fixit Polyplus CP Admix to the sand and coarse aggregates. Mix the components thoroughly for 2-3 minutes before adding the cement and water.

2. For larger (RMC/Plant) mixes, dispense the prescribed dosage of Dr. Fixit Polyplus CP Admix in 60-70% of pre-batched water. Mix the components thoroughly for 2-3 minutes before adding the batched cement, sand, coarse aggregates and remaining water. Mix for 5-7 minutes. The batching and mixing of total concrete mass should be in accordance with standard practice.

3. Seal sanitary pipes entering through the walls and floor with Dr. Fixit Bathseal Tape and grout the gaps with Dr. Fixit Bathseal Grout - a non-shrink cementitious grout.

4. Prime the surface using Dr. Fixit Coal tar epoxy.

5. Apply the 1st coat of Dr. Fixit Coal tar epoxy and allow it to dry completely for 12 to 15 hrs.

6. Apply a 2nd coat of Dr. Fixit coal tar epoxy and allow it to dry completely.

7. The manhole shall be made operational after 4-7 days after full curing.

CAD Diagram

Technical data Sheet

WATERPROOFING OF EFFLUENT TREATMENT PLANT

3D Diagram

Pidilite