- Spray applied instant setting
- High abrasion resistant
- System Life Expectancy – 15 years.
Method Statement
SURFACE PREPARATION
1. Clean the surface thoroughly to get rid of all contaminants. Remove all surface imperfections and repair with a polymer modified mortar using Dr. Fixit Pidicrete URP.
2. Use Dr. Fixit PU Primer if the moisture content is less than 4% and use Dr. Fixit MI-EP Primer if the moisture content is 5-8%.
APPLICATION
1. Spray apply Dr. Fixit Polyurea to achieve a minimum thickness of 1.5 mm (specially designed heated system).
2. Place a geotextile fabric of 150 gsm over the membrane before laying the concrete screed of M20 grade modified with Dr. Fixit Pidiproof LW+.
3. Maintain a 1:100 slope towards the drain outlets for effective and efficient drainage.
4. Apply bond coat on the walls before sand sprinkling, this will provide the key for subsequent plaster.
CAD Diagram
3D Diagram

