Dr. Fixit does not offer any gifts/vouchers/discount coupons etc. in exchange of personal details or particulars. Please note that we have/will not authorise(d) any communication in this regard and any such information should be disregarded. Any communication of this nature is not endorsed by Dr. Fixit or Pidilite Industries.
Dr. Fixit does not offer any gifts/vouchers/discount coupons etc. in exchange of personal details or particulars. Please note that we have/will not authorise(d) any communication in this regard and any such information should be disregarded. Any communication of this nature is not endorsed by Dr. Fixit or Pidilite Industries.
Home > Professional New > Dry Walls Waterproofing

Dry Walls Waterproofing

DR. FIXIT EUATITE

 

Seamless, high flexible and self priming membrane for dry walls.

  • Eco-Friendly elastomer copolymer
  • Reduces Installation Time
  • Can be applied over a wide range of substrates

Method Statement

SURFACE PREP ARATION

1. Surface must be clean, dry and in sound condition to ensure adequate adhesion.

2. Remove all oil, grease, dust, loose particles and other foreign material.

3. Fill all cracks, voids and bug-holes with an appropriate Crack Filler.

4. Always follow appropriate standard methods for preparing the surfaces.

APPLICATION

1. Dr. Fixit Euatite can be directly applied to the pre-wetted damp surface.

2. All joints / corners and penetrations shall be sealed with liberal amount of the waterproofing coating Dr. Fixit Euatite.

3. Apply 2 coats of Dr. Fixit Euatite by brush or roller at the rate of 2.5-2.8 sq.m/litre per coat, to achieve a total DFT of 600 – 800 microns in 2 coats.

4. Allow complete drying time for about 2 to 3 hours in between coats.

Technical data Sheet

Dr. Fixit Euatite

Pidilite