Dr. Fixit does not offer any gifts/vouchers/discount coupons etc. in exchange of personal details or particulars. Please note that we have/will not authorise(d) any communication in this regard and any such information should be disregarded. Any communication of this nature is not endorsed by Dr. Fixit or Pidilite Industries.
Dr. Fixit does not offer any gifts/vouchers/discount coupons etc. in exchange of personal details or particulars. Please note that we have/will not authorise(d) any communication in this regard and any such information should be disregarded. Any communication of this nature is not endorsed by Dr. Fixit or Pidilite Industries.
Home > Professional New > DAMP-PROOF COATING FOR WATER RESERVOIRS

DAMP-PROOF COATING FOR WATER RESERVOIRS

DR. FIXIT DAMPGUARD

 

Damp-proof Coating for Water Reservoirs.

  • EASE OF APPLICATION
  • CFTRI CERTIFIED
  • ANTIFUNGAL PROPERTIES
  • LOW VOC

Method Statement

SURFACE PREPARATION

Clean the surface thoroughly to get rid of all contaminants.It should be free from oil, grease, dust, dirt, fungus and moss.

APPLICATION

1. Prepare a groove in the crack 1 mm to 5 mm. Clean the dust by washing it with water.

2. Fill the cracks & grooves with Dr. Fixit Dampguard and cement modified putty & allow it to dry for at least 24 hours.

3. Brush/ Spray apply the first coat of Dr. Fixit Dampguard. Allow drying for 6 to 8 hrs.

4. In case of severe dampness problems, apply Dr. Fixit Dampguard - OPC white cement Putty on the entire surface area. Allow it to dry for at least 24 hours.

5. Brush/ Spray apply second coat of Dr. Fixit Dampguard.

6. Allow it to cure for minimum 3-4 days prior to storage of the water. The treatment of Dr. Fixit Dampguard then must be cleaned with the help of damp cloth or sponge and with plenty of water prior to storage of the water.

CAD Diagram

Technical data Sheet

DAMP-PROOF COATING FOR WATER RESERVOIRS

Pidilite