Dr. Fixit does not offer any gifts/vouchers/discount coupons etc. in exchange of personal details or particulars. Please note that we have/will not authorise(d) any communication in this regard and any such information should be disregarded. Any communication of this nature is not endorsed by Dr. Fixit or Pidilite Industries.
Dr. Fixit does not offer any gifts/vouchers/discount coupons etc. in exchange of personal details or particulars. Please note that we have/will not authorise(d) any communication in this regard and any such information should be disregarded. Any communication of this nature is not endorsed by Dr. Fixit or Pidilite Industries.
Home > Professional New > BELOW GROUND SWIMMING POOL - INTERNAL SIDE

BELOW GROUND SWIMMING POOL - INTERNAL SIDE

DR. FIXIT FASTFLEX

DR. FIXIT POLYPLUS CP ADMIX

 

System to prevent water loss from internal side.

  • HIGH ELASTIC FILLER
  • IMPERMEABLE TO WATER
  • CAN BE APPLIED ON DAMP SURFACES
  • NON-TOXIC AND VOC FREE

Method Statement

SURFACE PREPARATION

Clean the surface thoroughly to get rid of all contaminants. Remove all surface imperfections and repair with a polymer modified mortar using Dr. Fixit Pidicrete URP.

Dr. Fixit Polyplus CP Admix

APPLICATION

1. Add Dr. Fixit Polyplus CP Admix to the concrete mix at the rate of 1% by weight of the cement content or maximum of 6 kg per cubic meter. On site it is to be added in transit mixer after dispersing it in water to get proper mixing and minimum 8 to 10 minutes of agitation is required.

2. Reduce the water content by 5-10% depending on slump requirement and considering water added for dispersion of crystalline material. Water to cementitious ratio must be 0.45 or less.

Dr. Fixit Fastflex

Application

1. Pack the pipes and openings with Bathseal tapes and Grouts to achieve water-tightness all around.

2. Apply two coats of Fastflex to achieve desired thickness.

3. Ensure complete application inside Inserts like Electrical fittings and pipes.

4. Sprinkle Sand on last coat of fastflex to get best adhesion to tile adhesive.

Tile Fixing

1. Use Roff GTA to fix tiles on top of cured and Fast flex applied surface.

2. Apply Roff Epoxy Grout of desired colour to fill gaps in tiles and necessary gaps.

Electrical fittings an d light fittings

1. Apply one extra coat of Dr. Fixit Fastflex with fiber mesh on top inside Light fitting cut outs.

2. Insert light fittings with necessary rubber gaskets of Chlorine resistant rubber.

3. Finish with Chlorine resistant Silicon Sealant.

CAD Diagram

Technical data Sheet

BELOW GROUND SWIMMING POOL - INTERNAL SIDE

3D Diagram

Pidilite